Navigation und Service

German RMOA-List

Structure of the following table:

The substances are listed by their chemical name and sometimes also their common name.

The gathered information in the category "known uses" are abstracts from registration dossiers and therefore may not be complete.

The status shows whether a regulatory management option analysis [Link only available in German] (RMOA) is in progress or has already been concluded.

The "consultation" category gives companies or associations from the affected industries the possibility to submit relevant information via the web form provided (only active during consultation period).

Current consultations

-

Previous consultations

4,4'-methylene bis(dibutyldithiocarbamate); YALUB 44-MBC

CAS no.

10254-57-6

EC no.

233-593-1

Initial concern

very persistent, very bioaccumulative

Known uses

Lubricant, metal treatment

Status

RMOA in progress

Consultation

Public consultation closed

1H-Benzotriazole; BTA

CAS no.

95-14-7

EC no.

202-394-1

Initial concern

Persistence, mobility

Known uses

Amongst others: Dishwashing products, functional fluids (e.g. engine coolants, brake fluids), lubricant and grease in vehicles or machinery, surface treatment agent, polymer processing, metalworking fluid

Status

RMOA finalised

Conclusion

Risk Management Option Analysis Conclusion Document: Methyl-1H-Benzotriazol; Tolyltriazol (PDF, 118 KB)

Suggested follow up

- SVHC identification
- CLH

Consultation

Public consultation closed

Additional substances considered in this RMOA

Substance NameEC NumberCAS Number
Sodium-Methyl-1H-Benzotriazole265-004-964665-57-2
4(or 5)-methyl-1H-benzotriazole, potassium salt265-002-864665-53-8
6-Methylbenzotriazole205-265-8136-85-6
Reaction mass of 4-methyl-1H-benzotriazole and 29385-43-1931-891-2-

Methyl-1H-benzotriazole; tolyltriazole

CAS no.

29385-43-1

EC no.

249-596-6

Initial concern

Persistence, mobility

Known uses

Amongst others: Dishwashing products, functional fluids (e.g. engine coolants, brake fluids), lubricant and grease in vehicles or machinery, surface treatment agent, polymer production, metalworking fluid

Status

RMOA finalised

Conclusion

Risk Management Option Analysis Conclusion Document: Methyl-1H-Benzotriazol; Tolyltriazol (PDF, 118 KB)

Suggested follow up

- SVHC identification
- CLH

Consultation

Public consultation closed

Additional substances considered in this RMOA

Substance NameEC NumberCAS Number
Sodium-Methyl-1H-Benzotriazole265-004-964665-57-2
4(or 5)-methyl-1H-benzotriazole, potassium salt265-002-864665-53-8
6-Methylbenzotriazole205-265-8136-85-6
Reaction mass of 4-methyl-1H-benzotriazole and 29385-43-1931-891-2-

Substances in fibreform

Protection against fibre dust (alveolar and with critical morphologies) in the EU.

The adverse health effects of bio-persistent fibre dust with critical morphology are independent of their chemical properties. Fibre dust with critical morphology consists of particles with a length greater than 5 µm, a diameter smaller than 3 µm, and a length-to-diameter ratio greater than 3:1 (WHO fibre criterion). Due to these dimensions, they are able to reach the deep lung (alveoli and bronchioles) after inhalation. This also applies to thicker fibres (> 3 µm), if they have a fracture behaviour that leads to fibre dust (splinter fracture). A well-known example of fibre toxicity and potential adverse effects is asbestos. In order to build a solid information base on relevant fibre materials for the evaluation of regulatory options, it is also essential to have differentiated information on manufacturing, import and use quantities as well as on exposure-relevant life cycle steps. The focus is on fibre materials with a diameter smaller than 3 µm as well as other materials that can release fibre dust with diameters smaller than 3 µm during their life cycle due to mechanical effects (e.g. breaking/splicing), chemical processes (e.g. oxidation/aging) or physical conditions (e.g. heat).

Initial concern

Carcinogenicity

Presentation Webinar 25.01.2022

Download PDF

Status

RMOA finalised

Conclusion

Risk Management Option Analysis Conclusion Document: Substances in fibre form (PDF, 201 KB)

Suggested follow up

Restriction

Public consultation

Consultation closed

Melamine; 2,4,6-Triamino-1,3,5-triazine

CAS no.

108-78-1

EC no.

203-615-4

Initial concern

Persistent, mobile and toxic (PMT), toxic to reproduction, high exposure

Known uses

Wide dispersive, e.g. resins, adhesives, flame retardants, coatings, kitchenware, melaware, bambooware

Status

RMOA finalised

Conclusion

Risk Managment Option Analysis Conclusion Dokument; Melamin (PDF, 225 KB)

Suggested follow up

- SVHC identification
- CLH
- indicative occupational exposure limit values (IOELV)

Consultation

Consultation closed

Borates in consumer products

Substance ID
(CAS-Nr.; EG-Nr.)
Initial concernKnown consumer uses
Boric acid
CAS-Nr. 10043-35-3,
11113-50-1
EG-Nr. 233-139-2,
234-343-4
toxic to reproduction for both developmental and fertility effects, i.e. Repr. 1B (H360FD)
  • stabiliser in washing and cleaning products
  • adhesive for paper articles
  • flame retardant, biocide in cellulose and glass wool insulation/construction materials
  • abrasives
  • constituent in glass and ceramic articles;
  • stabiliser, preservative, viscosity agent in automotive fluids (anti-freeze/de-icing, lubricants/greases, hydraulic fluids, flux paste, heat transfer, break fluids);
  • micronutrient in fertilisers
  • pH regulator, preservative in paints and coatings
Diboron trioxide
CAS-Nr. 1303-86-2
EG-Nr. 215-125-8
toxic to reproduction for both developmental and fertility effects, i.e. Repr. 1B (H360FD)
  • adhesive for paper articles
  • flame retardant in cellulose and glass wool insulation/construction materials
  • abrasives
disodium tetra­borat, anhydrous
CAS-Nr. 1330-43-4
EG-Nr. 215-540-4
toxic to reproduction for both developmental and fertility effects, i.e. Repr. 1B (H360FD)
  • stabiliser in washing and cleaning products
  • adhesive for paper articles
  • flame retardant, biocide in
    cellulose and glass wool insulation/construction materials
  • abrasives
  • constituent in glass and ceramic articles;
  • stabiliser, preservative, viscosity agent in automotive fluids (anti-freeze/de-icing, lubricants/greases, hydraulic fluids, flux paste, heat transfer, break fluids);
  • micronutrient in fertiliser pH regulator, preservative in paints and coatings
Tetra­boron disodium heptaoxide, hydrate
CAS-Nr. 12267-73-1
EG-Nr. 235-541-3
toxic to reproduction for both developmental and fertility effects, i.e. Repr. 1B (H360FD)
  • unknown
  • possible alternative/ Substitute
Orthoboric acid, sodium salt
CAS-Nr. 13840-56-7
EG-Nr. 237-560-2
toxic to reproduction for both developmental and fertility effects, i.e. Repr. 1B (H360FD)
  • unknown
  • possible alternative/ Substitute
Disodium tetra­borate deca­hydrate
CAS-Nr. 1303-96-4
EG-Nr. 215-540-4
toxic to reproduction for both developmental and fertility effects, i.e. Repr. 1B (H360FD)
  • same uses as disodium tetraborate, anhydrous; boric acid, disodium salt (CAS 1330-43-4)
Disodium tetra­borate penta­hydrate
CAS-Nr. 12179-04-3
EG-Nr. 215-540-4
toxic to reproduction for both developmental and fertility effects, i.e. Repr. 1B (H360FD)
  • same uses as disodium tetraborate, anhydrous; boric acid, disodium salt (CAS 1330-43-4)
Disodium octa­borate anhydrous
CAS-Nr. 12008-41-2
EG-Nr. 234-541-0
toxic to reproduction for both developmental and fertility effects, i.e. Repr. 1B (H360FD)
  • adhesive for paper articles
  • flame retardant, biocide in
    cellulose and glass wool insulation/construction materials
  • flame retardant in textiles for car seats and belts
  • abrasives
  • constituent in glass and ceramic articles
  • micronutrient in fertilisers
Disodium octa­borate tetra­hydrate
CAS-Nr. 12280-03-4
List-Nr. 234-541-0
toxic to reproduction for both developmental and fertility effects, i.e. Repr. 1B (H360FD)
  • same uses as disodium octaborate anhydrous (CAS 12008-41-2)

Status

RMOA closed

Suggested follow up

-

Consultation

Consultation closed

Solvents in consumer products

The RMOA for solvents in consumer products was divided into individual RMOAs for the respective substances. They are processed in the order shown in the table below. The xylenes are combined in one RMOA

Substance ID
(CAS-Nr.; EG-Nr.)
Initial concernKnown consumer usesStatus & recommended measures
tetrahydrofuran
CAS-Nr. 109-99-9
EG-Nr. 203-726-8
Cancerogen, mutagen or toxic for reproductionadhesives and sealants, coating products, washing & cleaning products, anti-freeze products, fillers, putties, plasters, modelling clay, finger paints, lubricants and greases, paints, fragrances and air fresheners and inks and toners.

RMOA finalised

Risk Management Option Analysis Conclusion Document: Tetrahydrofuran (PDF, 200 KB)

harmonised classification and restriction

benzyl alcohol
CAS-Nr. 100-51-6
EG-Nr. 202-859-9
Sensitisercoating products, washing & cleaning products, inks and toners, adhesives and sealants, fillers, putties, plasters, modelling clay, polishes and waxes and pH regulators and water treatment products, paints, fragrances and air fresheners.

RMOA finalised

Risk Management Option Analysis Conclusion Document: Benzyl alcohol in cosumer products (PDF, 229 KB)

No action needed at this time.

1,3-dioxolane
CAS-Nr. 646-06-0
EG-Nr. 211-463-5
mutagen or toxic for reproductioncoating products, adhesives and sealants, washing & cleaning products and leather treatment products.

RMOA finalised
RMOA conclusion 1,3-dioxolane (PDF, 200 KB)

harmonised classification

n-hexan
CAS-Nr. 110-54-3
EG-Nr. 203-777-6
Cancerogen, mutagen, toxic for reproduction or neurotoxicadhesives and sealants, anti-freeze products, biocides (e.g. disinfectants, pest control products), coating products, fillers, putties, plasters, modelling clay, finger paints, non-metal-surface treatment products, inks and toners, leather treatment products, lubricants and greases, perfumes and fragrances, polishes and waxes, textile treatment products and dyes and cosmetics and personal care products.

RMOA finalised

Risk Management Option Analysis Conclusion Document: n-Hexane in consumer products (PDF, 112 KB)

SVHC identification or restriction

o-xylol
CAS-Nr. 95-47-6
EG-Nr. 202-422-2
Cancerogen, mutagen, toxic for reproduction or sensitiseranti-freeze products, biocides (e.g. disinfectants, pest control products), lubricants and greases, coating products, adhesives and sealants, fillers, putties, plasters, modelling clay, non-metal-surface treatment products and fuels.RMOA ongoing
m-xylol
CAS-Nr. 108-38-3
EG-Nr. 203-576-3
Cancerogen, mutagen, toxic for reproduction or sensitiseranti-freeze products, biocides (e.g. disinfectants, pest control products), lubricants and greases, adhesives and sealants, air care products, fertilisers, fuels, non-metal-surface treatment products, inks and toners, leather treatment products, plant protection products, polishes and waxes, textile treatment products and dyes, washing & cleaning products and welding & soldering products.RMOA ongoing
p-xylol
CAS-Nr. 106-42-3
EG-Nr. 203-396-5
Cancerogen, mutagen, toxic for reproduction or sensitiserThis substance is used in the following products: anti-freeze products, lubricants and greases, biocides (e.g. disinfectants, pest control products), adhesives and sealants, non-metal-surface treatment products, coating products and fuels.RMOA ongoing
xylene (isomeric mixture of m-, p-, o-xylene)
CAS-Nr. 1330-20-7
EG-Nr. 215-535-7
Cancerogen, mutagen, toxic for reproduction or sensitiserlubricants and greases, anti-freeze products, biocides (e.g. disinfectants, pest control products), polishes and waxes and adhesives and sealants.RMOA ongoing
Reaction mass of ethylbenzene and xylene
CAS-Nr. -
List-Nr. 905-588-0
Cancerogen, mutagen, toxic for reproduction or sensitiserlubricants and greases, polishes and waxes, adhesives and sealants, anti-freeze products and biocides (e.g. disinfectants, pest control products).RMOA ongoing
Reaction mass of ethylbenzene and m-xylene and p-xylene
CAS-Nr. -
List-Nr. 905-562-9
Cancerogen, mutagen, toxic for reproduction or sensitiserlubricants and greases, adhesives and sealants, anti-freeze products, biocides (e.g. disinfectants, pest control products) and polishes and waxes.RMOA ongoing

Consultation

Consultation closed

PFAS

Substance identity

Substances that contain at least one aliphatic -CF2- or -CF3 element.

Initial concern

Persistent

Known uses

Textiles, leather; Cosmetic products; Food contact materials; Paper and board; Firefighting foams; Household articles and consumer mixtures; Construction products; Lubricants and greases; Chrome plating; Semiconductors; Mixtures for treatment of skis; Medical devices; Applications within oil, gas and mining industry; F-Gases; Uses of C1 perfluorinated carboxylic and sulfonic acids; Transportation (automotive, aviation etc.); Photographic surface layers etc.

Status

RMOA finalised

Regulatory Management Option Analysis Conclusion Document: Per- and polyfluoroalkyl substances, PFAS (PDF, 257 KB)

Suggested follow up

Restriction

Consultation

Consultation closed

MEKO, Acetonoxim, MPKO, MIBKO and their corresponding oxime-silane-compounds

MEKO and alternative oximes in paints, varnishes and sealants
NameCAS-No.EC-No.
Butanonoxim (MEKO)96-29-7202-496-6
Acetonoxim127-06-0204-820-1
(E)-N-(pentan-2-ylidene)hydroxylamine (MPKO)623-40-5484-470-6
4-methylpentan-2-one oxime (MIBKO)105-44-2203-298-2
List of registered MEKO-silane- and alternative oxime-silane-compounds
NameCAS-No.EG-No.
O,O',O''-(methylsilylidyne)trioxime 2-pentanone37859-55-5484-460-1
2-Pentanone-4methyl-,O,O’,O”-(ethenylsilylidyne)trioxime156145-64-1421-860-7
2-Butanone-O,O',O''-(phenylsilylidyne)trioxime34036-80-1433-360-6
2-Pentanone, O,O',O''-(ethenylsilylidyne)trioxime58190-62-8700-810-0
2-Pentanone, O,O',O''-(phenylsilylidyne)trioxime1170315-90-8700-833-6
2-Propanone, 2,2',2''-[O,O',O''-(ethylsilylidyne)trioxime]58190-57-1611-631-1
A mixture of: propan-2-one-O,O'-(methoxymethylsilandiyl)dioxime; propan-2-one-O-(dimethoxymethylsilyl)oxime; propan-2-one-O,O',O''-(methylsilantriyl)trioxime797751-43-0460-110-3
A mixture of: propan-2-one-O,O'(methoxyvinylsilandiyl)dioxime; propan-2-one-O-(dimethoxyvinylsilyl)oxime; propan-2-one-O,O',O''-(vinylsilantriyl)trioxime797751-44-1458-680-3
Butan-2-one O,O',O''-(methylsilylidyne)trioxime22984-54-9245-366-4
Butan-2-one O,O',O''-(vinylsilylidyne)trioxime2224-33-1218-747-8
Butan-2-one O,O',O'',O'''-silanetetrayltetraoxime34206-40-1251-882-0
Pentan-2-one O,O',O'',O'''-silanetetrayltetraoxime1170315-92-0942-139-8
Methyl-tris acetonoximo-silane2594-75-4640-410-2

Initial concern

Cancerogen, mutagen or toxic for reproduction (CMR)

Known uses

MEKO, its alternatives and derivates are used as anti-skinning agent in paints and varnishes and in curing agents of silicone-sealants

Status

RMOA ongoing
Risk Management Option Analysis Conclusion Document: MEKO, its oxime alternatives and the respective oxime-releasing silanes (PDF, 213 KB)

Risk Management Option Analysis Conclusion Document: Oxime-releasing silanes in paints, coatings and sealants. (PDF, 240 KB)

Suggested follow up

CLH and Restriction

Consultation

Public consultation closed

1,4-dioxane

CAS no.

123-91-1

EC no.

204-661-8

Initial concern

Persistent, mobile and toxic (PMT)

Known uses

  • pH-Regulator;
  • Professional uses in detergents, paints, coatings, adhesives as well as air fresheners/fragrances;
  • in closed systems (component of heat transfer liquids);
  • Industrial uses as processing aid (solvent) and intermediate in production of other chemicals

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: 1,4-dioxane (PDF, 196 KB)

Suggested follow up

-

Consultation

Public consultation closed

Alkanes, C14-17, chloro; chlorinated paraffins, C14-17

CAS no.

85535-85-9

EC no.

287-477-0

Initial concern

Cancerogen, mutagen or toxic for reproduction (CMR), persistent, bioaccumulative and toxic (PBT)

Known uses

Plastiziser, lubricant, flame retardant

Status

RMOA ongoing

Suggested follow up

-

Consultation

Public consultation closed

Phenol, alkylation products (mainly in para position) with C12-rich branched or linear olefins from propene oligomerisation, covering any individual isomers and/ or combinations thereof

Exemplary the following substances are covered:

  • Phenol, (tetrapropenyl), derivatives (CAS no.:74499-35-7)
  • Phenol, dodecyl-, branched (CAS no.: 121158-58-5)
  • Phenol, 4-dodecyl, branched (CAS no.: 210555-94-5)
  • Dodecylphenol, mixed isomers (CAS no.: 27193-86-8)
  • Phenol, tetrapropylene (4-(2,4-dimethyl-3-propylheptyl)phenol (CAS no.: 57427-55-1)
  • Phenol, 4-isododecyl; 4-isododecylphenol (CAS no.: 27459-10-5)
  • p-Dodecyl-phenol (CAS no.: 104-43-8)

Initial concern

Toxic for reproduction, endocrine disruptor for human and the environment

Known uses

Preparation of lubricant additive materials and of fuel system cleaners, intermediate for the production of special resins, as well as monomers for phenol/formaldehyde resins and ink resins

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: Phenol, alkylation products (mainly in para position) with C12-rich branched or linear alkylchains from oligomerisation, covering any individual isomers and/ or combinations thereof. (PDF, 300 KB)

Suggested follow up

-

Consultation

Public consultation closed

N,N-dicyclohexylbenzothiazole-2-sulphenamide (DCBS)

CAS no.

4979-32-2

EC no.

225-625-8

Initial concern

Very persistent and very bioaccumulative (vPvB)

Known uses

Production of tyres and rubber products and use of these products

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: N,N-dicyclohexylbenzothiazole-2-sulphenamide (DCBS) (PDF, 179 KB)

Suggested follow up

CLH

Consultation

Public consultation closed

Octamethylcyclotetrasiloxane (D4)

CAS no.

556-67-2

EC no.

209-136-7

Initial concern

Persistent, bioaccumulative and toxic (PBT), very persistent and very bioaccumulative (vPvB)

Known uses

Monomer in the production of silicone polymers, resins and other organosilicon substances; electronics applications; washing and cleaning agents; cosmetics; personal care products (PCPs); household care products; polishing agents; waxes; car care products; engine cleaning agents; lubricants and release agents; paints and coatings; perfume; air freshener; laboratory agents; processing aids; non-metal surface treatment; textile finishing; toner for printing inks

Additional application in articles: Toys; construction materials; curtains; carpets; floors; carpet cleaning agents; furniture; footwear; leather products; paper products (tissues, feminine hygiene products, nappies, books, magazines, wallpaper); rubber products; plastic products; mineral products (e.g. plasters, cement); electrical, electronic and optical equipment; semiconductors

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: Octamethylcyclotetrasiloxane (D4) / Decamethylcyclopentasiloxane (D5) (PDF, 120 KB)

Suggested follow up

Identification as SVHC (authorisation not recommended)

Consultation

Public consultation closed

Decamethylcyclopentasiloxane (D5)

CAS no.

541-02-6

EC no.

208-764-9

Initial concern

Very persistent and very bioaccumulative (vPvB)

Known uses

Monomer in the production of silicone polymers, resins and other organosilicon substances; electronics; coatings; washing and cleaning agents; cosmetics; personal care products (PCPs); household care products in industrial settings; dry cleaning; medical adhesives and pharmaceuticals; processing aid in the pulp manufacturing industry; lubricants and release agents; textile finishing; industrial greases; laboratory agents

Additional application in articles: Rubber products; electrical, electronic and optical equipment

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: Octamethylcyclotetrasiloxane (D4) / Decamethylcyclopentasiloxane (D5) (PDF, 120 KB)

Suggested follow up

Identification as SVHC (authorisation not recommended)

Consultation

Public consultation closed

Bisphenol A

CAS no.

541-02-6

EC no.

208-764-9

Initial concern

Endocrine disruptor (environment)

Known uses

Monomer in the manufacture of epoxy resins, polycarbonate, intermediate for the manufacture of further chemicals, e.g. tetrabromobisphenol A, anti-oxidant in plastics, developing agent in thermal paper

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: 4,4’-isopropylidenediphenol (Bisphenol A, BPA) (PDF, 67 KB)

Suggested follow up

SVHC identification followed by restriction

Consultation

Public consultation closed

Fluoranthene

CAS no.

206-44-0

EC no.

205-912-4

Initial concern

Very persistent and very bioaccumulative (vPvB), very toxic for aquatic life

Known uses

Used in numerous processes and products

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: Fluoranthene / Pyrene / Benz(a)anthracene / Chrysene / Benzo(k)fluoranthene / Benzo(ghi)perylene / Phenanthrene (PDF, 128 KB)

Suggested follow up

SVHC identification

Consultation

Public consultation closed

Pyrene

CAS no.

129-00-0

EC no.

204-927-3

Initial concern

Very persistent and very bioaccumulative (vPvB), very toxic for aquatic life

Known uses

Used in numerous processes and products

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: Fluoranthene / Pyrene / Benz(a)anthracene / Chrysene / Benzo(k)fluoranthene / Benzo(ghi)perylene / Phenanthrene (PDF, 128 KB)

Suggested follow up

SVHC identification

Consultation

Public consultation closed

Benz[a]anthracen

CAS no.

56-55-3

EC no.

200-280-6

Initial concern

Very persistent and very bioaccumulative (vPvB), cancerogen, mutagen or toxic for reproduction (cmr), very toxic for aquatic life

Known uses

Used in numerous processes and products

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: Fluoranthene / Pyrene / Benz(a)anthracene / Chrysene / Benzo(k)fluoranthene / Benzo(ghi)perylene / Phenanthrene (PDF, 128 KB)

Sugested follow up

SVHC identification

Consultation

Public consultation closed

Chrysene

CAS no.

218-01-9

EC no.

205-923-4

Initial concern

Very persistent and very bioaccumulative (vPvB), cancerogen, mutagen or toxic for reproduction (cmr)

Known uses

Used in numerous processes and products

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: Fluoranthene / Pyrene / Benz(a)anthracene / Chrysene / Benzo(k)fluoranthene / Benzo(ghi)perylene / Phenanthrene (PDF, 128 KB)

Sugested follow up

SVHC identification

Consultation

Public consultation closed

Benzo[k]fluoranthene

CAS no.

207-08-9

EC no.

205-916-6

Initial concern

Very persistent and very bioaccumulative (vPvB), cancerogen, mutagen or toxic for reproduction (cmr), very toxic for aquatic life

Known uses

Used in numerous processes and products

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: Fluoranthene / Pyrene / Benz(a)anthracene / Chrysene / Benzo(k)fluoranthene / Benzo(ghi)perylene / Phenanthrene (PDF, 128 KB)

Sugested follow up

SVHC identification

Consultation

Public consultation closed

Benzo[ghi]perylene

CAS no.

191-24-2

EC no.

205-883-8

Initial concern

Very persistent and very bioaccumulative (vPvB), very toxic for aquatic life

Known uses

Used in numerous processes and products

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: Fluoranthene / Pyrene / Benz(a)anthracene / Chrysene / Benzo(k)fluoranthene / Benzo(ghi)perylene / Phenanthrene (PDF, 128 KB)

Sugested follow up

SVHC identification

Consultation

Public consultation closed

Phenanthrene

CAS no.

85-01-8

EC no.

201-581-5

Initial concern

Very persistent and very bioaccumulative (vPvB)

Known uses

Used in numerous processes and products

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: Fluoranthene / Pyrene / Benz(a)anthracene / Chrysene / Benzo(k)fluoranthene / Benzo(ghi)perylene / Phenanthrene (PDF, 128 KB)

Sugested follow up

SVHC identification

Consultation

Public consultation closed

Perchloric acid, its salts and precursors

CAS no.

7601-90-3

EC no.

231-512-4

Initial concern

Endocrine disruptor (environment)

Known uses

Production of solid fuel propellants, pyrotechnic articles, manufacture of other perchlorate salts, explosives, additive for plastic processing, reactive processing aids, intermediates

Status

RMOA under examination

Suggested follow up

-

Consultation

Public consultation closed

C9-C14 PFCAs including their salts and precursors

CAS no.

-

EC no.

-

Initial concern

Persistent, bioaccumulative and toxic (PBT), very persistent and very bioaccumulative (vPvB)

Known uses

  • monomer for the manufacture of fluoropolymers and fluorinated polymers: Application in materials for extreme conditions (corrosion inhibitor, flame retardant, isolation), medicinal applications, membranes, automotive engineering, construction materials
  • fluorinated emulgators (e.g. galvanic industry)
  • application in water- and oil-repellent and non-soiling textiles (outdoor gear, personal protective equipment, rugs, carpets), paper coatings (photographic industry, food industry), coatings of household articles (e.g. non-stick cookware),
  • constituent of lubricants and impregnants
  • constituent of cosmetics

Status

RMOA finalised in cooperation with Sweden
Risk Management Option Analysis Conclusion Document: C9-C14 PFCAs including their salts and precursors (PDF, 68 KB)

Suggested follow up

Restriction

Consultation

Public consultation closed

PFHxA, its salts and precursors

CAS no.

307-24-4

EC no.

206-196-6

Initial concern

Persistent, mobile and toxic (PMT), relevant to drinking water

Known uses

Monomer for the manufacture of fluoropolymers and fluorinated polymers: Application in materials for extreme conditions (corrosion inhibitor, flame retardant, isolation), medicinal applications, membranes, automotive engineering, construction materials

Fluorinated emulgators (e.g. galvanic industry)

Application in water- and oil-repellent and non-soiling textiles (outdoor gear, personal protective equipment, rugs, carpets), paper coatings (photographic industry, food industry), coatings of household articles (e.g. non-stick cookware), fire extinguishants, constituent of lubricants and impregnants

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: Undecafluorohexanoic acid (PFHxA) including its salts and precursors (PDF, 76 KB)

Suggested follow up

SVHC identification followed by restriction

Consultation

Public consultation closed

Nickel sulphide

CAS no.

16812-54-7

EC no.

240-841-2

Initial concern

cancerogen, mutagen or reprotoxic (CMR) and worker exposure

Known uses

As catalyst (extrudates, pellets, tablets, spheres, encapsulated powders), for the production of catalysts containing other Ni compounds

Status

RMOA finalised in cooperation with Hungaria
Risk Management Option Analysis Conclusion Document: Nickel sulphide and trinickel disulphide (PDF, 116 KB)

suggested follow up

-

Consultation

Public consultation closed

Trinickel disulphide

CAS no.

12035-72-2

EC no.

234-829-6

Initial concern

Cancerogen, mutagen or reprotoxic (CMR) and worker exposure

Known uses

As catalyst (extrudates, pellets, tablets, spheres, encapsulated powders), for the production of catalysts containing other Ni compounds

Status

RMOA finalised in cooperation with Hungaria
Risk Management Option Analysis Conclusion Document: Nickel sulphide and trinickel disulphide (PDF, 116 KB)

Suggested follow up

-

Consultation

Public consultation closed

4-tert-Butylphenol

CAS no.

98-54-4

EC no.

202-679-0

Initial concern

Endocrine disruptor (environment)

Known uses

Monomer for the manufacture of polymers (phenolic resins), as hardener, in inks, coatings and adhesives

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: 4-tert-butylphenol (PDF, 58 KB)

Suggested follow up

Identification as SVHC (authorisation)

Consultation

Public consultation closed

p-(1,1-dimethylpropyl)phenol

CAS no.

80-46-6

EC no.

201-280-9

Initial concern

Endocrine disruptor (environment)

Known uses

Monomer for the manufacture of phenolic resins, manufacture of fragrances and perfumes, water treatment chemicals

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: p-(1,1-dimethylpropyl)phenol (PDF, 63 KB)

Suggested follow up

Identification as SVHC (authorisation)

Consultation

Public consultation closed

Phenol, heptyl derivs.

CAS no.

72624-02-3

EC no.

276-743-1

Initial concern

Endocrine disruptor (environment)

Known uses

Lubricant and fuel additive

Status

RMOA finalised in cooperation with Austria
Risk Management Option Analysis Conclusion Document: Phenol, heptyl derivatives (PDF, 275 KB)

Suggested follow up

Identification as SVHC (authorisation)

Consultation

Public consultation closed

2-(2H-Benzotriazol-2-yl)-4-methylphenol (UV-P)

CAS no.

2440-22-4

EC no.

219-470-5

Initial concern

Persistent, bioaccumulative and toxic

Known uses

UV filter, used in coatings, plastics, adhesives, polyureathan, rubber and printing inks; according to the registration uses in industrial, prefessional and cosumer area and uses during article service life

Status

RMOA under examination

Suggested follow up

-

Consultation

Public consultation closed

2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol (UV-234)

CAS no.

70321-86-7

EC no.

274-570-6

Initial concern

Very persistent and very bioaccumulative (vPvB)

Known uses

UV filter, used in coatings, plastics, adhesives, polyureathan, rubber and printing inks; according to the registration uses in industrial, prefessional and cosumer area and uses during article service life

Status

RMOA under examination

sugested follow up

-

Consultation

Public consultation closed

2-(2'-Hydroxy-3'-tert-butyl-5'-methylphenyl)-5-chlorobenzotriazol (UV-326)

CAS no.

3896-11-5

EC no.

223-445-4

Initial concern

Persistent, bioaccumulative and toxic (PBT)

Known uses

UV filter, used in coatings, plastics, adhesives, rubber, printing inks and cosmetics; according to the registration uses in industrial, prefessional and cosumer area and uses during article service life

Status

RMOA under examination

Suggested follow up

-

Consultation

Public consultation closed

2,4-Di-tert-butyl-6-(5-chlorobenzotriazol-2-yl)phenol (UV-327)

CAS no.

3864-99-1

EC no.

223-383-8

Initial concern

Very persistent and very bioaccumulative (vPvB)

Known uses

UV filter, it is mainly used in coatings (for cars or industrial wood applications), plastics, rubber and polyurethan

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: 2-(5-Chloro-2H-benzotriazol-2-yl)-4,6-bis(2-methyl-2-propanyl)phenol (UV-327) (PDF, 131 KB)

Suggested follow up

Identification as SVHC (authorisation)

Consultation

Public consultation closed

2-(2H-Benzotriazol-2-yl)-4-(1,1,3,3-tetra-methylbutyl)phenol (UV-329)

CAS no.

3147-75-9

EC no.

221-573-5

Initial concern

Persistent, bioaccumulative and toxic (PBT)

Known uses

UV filter, used in plastics and rubber; according to the registration uses in industrial area, uses during article service life

Status

RMOA under examination

sugested follow up

-

Consultation

Public consultation closed

2-(2H-Benzotriazol-2-yl)-4-(tert-butyl)-6-(sec-butyl)phenol (UV-350)

CAS no.

36437-37-3

EC no.

253-037-1

Initial concern

Very persistent and very bioaccumulative (vPvB)

Known uses

UV filter, it is mainly used in coatings (for cars or industrial wood applications), plastics, rubber and polyurethan

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: 2-(2H-Benzotriazol-2-yl)-6-sec-butyl-4(2-methyl-2-propanyl)phenol (UV-350) (PDF, 130 KB)

Suggested follow up

Identification as SVHC (authorisation)

Consultation

Public consultation closed

2-(2H-Benzotriazol-2-yl)-6-(1-methyl-1-phenylethyl)-4-(1,1,3,3-tetramethyl
butyl)phenol (UV-928)

CAS no.

73936-91-1

EC no.

422-600-5

Initial concern

Very persistent and very bioaccumulative (vPvB)

Known uses

UV filter, used in paints and coatings, e.g. for vehicles, wood, plastics; according to the registration uses in industrial and prefessional area and uses during article service life

Status

RMOA under examination

Suggested follow up

-

Consultation

Public consultation closed

Beryllium

CAS no.

7440-41-7

EC no.

231-150-7

Initial concern

Carcinogen

Known uses

component of alloys; construction of scientific equipment; nuclear technology and aerospace industry; mechanic equipment; electronic devices; metal articles

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: Beryllium (PDF, 120 KB)

Suggested follow up

BOEL and followed by labour inspector activities
Product Stewardship program by BeST

Consultation

Public consultation closed

1,7,7-trimethyl-3-(phenylmethylene)bicyclo[2.2.1]heptan-2-one (or trivial: 3-benzylidene camphor)

CAS no.

15087-24-8

EC no.

239-139-9

Initial concern

Endocrine disruptor

Known uses

UV filter in sunscreens and other cosmetics

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: 1,7,7-trimethyl-3-(phenylmethylene)bicyclo[2.2.1]heptan-2-one (3-benzylidene camphor) / (±)-1,7,7-trimethyl-3-[(4-methylphenyl)methylene]bicyclo[2.2.1]heptan-2-one (4-methylbenzylidene camphor) (PDF, 116 KB)

Suggested follow up

Identification as SVHC (authorisation)

Consultation

Public consultation closed

(±)-1,7,7-trimethyl-3-[(4-methylphenyl)methylene]bicyclo[2.2.1]heptan-2-one (or trivial: 3-(4-methylbenzylidene)camphor)

CAS no.

36861-47-9

EC no.

253-242-6

Initial concern

Endocrine disruptor

Known uses

UV filter in sunscreens and other cosmetics

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: 1,7,7-trimethyl-3-(phenylmethylene)bicyclo[2.2.1]heptan-2-one (3-benzylidene camphor) / (±)-1,7,7-trimethyl-3-[(4-methylphenyl)methylene]bicyclo[2.2.1]heptan-2-one (4-methylbenzylidene camphor) (PDF, 116 KB)

Suggested follow up

Identification as SVHC (authorisation)

Consultation

Public consultation closed

Nitric acid

CAS no.

7697-37-2

EC no.

231-714-2

Initial concern

Acute Toxic Category 1

Known uses

washing and cleaning products (including solvent based products); polishes and wax blends; air care products; biocidal products (e.g. desinfectants, pest control); fertilisers; metal surface treatment products; including galvanic and electroplating products; laboratory chemicals; stone, plaster, cement, glass and ceramic articles

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: Nitric acid (PDF, 113 KB)

Suggested follow up

CLH

Consultation

Public consultation closed

Diisocyanate - grouping approach amongst others: tosyldiisocyanate (TODI), 1,5-naphthylenediisocyanate (NDI), methylendiphenyldiisocyanate (MDI), isophorondiisocyanate (IPDI), 2-methyl-m-phenylene diisocyanate (TDI) und hexamethylenediisocyanate (HDI)

CAS no.

-

EC no.

-

Initial concern

Respiratory sensitiser

Known uses

Insulation foams / spray foam; upholstery foams (rigid); upholstery foams (flexible); coatings (general); coatings (weatherable); coatings (packaging, coil); adhesives and sealants; elastomers/ TPU; thermoplastics (e.g. hoses); fibres; composite (a.o. wood binder); foundry forms; formulations; dental applications; leather tanning; oil additives

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: Diisocyanates (PDF, 169 KB)

Suggested follow up

Restriction

Consultation

Public consultation closed

Acrylonitrile

CAS no.

107-13-1

EC no.

203-466-5

Initial concern

Carcinogen

Known uses

Polymers and mixtures of polymers; production of textiles, fabrics and clothing

Status

RMOA finalised
Risk Management Option Analysis Conclusion Document: Acrylonitrile (PDF, 122 KB)

Suggested follow up

EU OEL

Consultation

Public consultation closed